Read This First - ESAB Aristo RoboFeed 3004w Service Manual

READ THIS FIRST

READ THIS FIRST
Maintenance and repair work must be performed by an experienced person, and electrical
work only by a trained electrician. Use only recommended replacement parts.
This service manual is intended for use by technicians with electrical/electronic training for
help in connection with fault-tracing and repair.
Use the wiring diagram as a form of index for the description of operation. The circuit boards
are divided into numbered blocks, which are described individually in more detail in the
description of operation. Component names in the wiring diagram are listed in the
component description.
Use the spare parts list as a guide to where the components are located in the equipment.
The spare parts list is published as a separate document, see the "SPARE PARTS" chapter
in this manual.
This manual contains details of all design changes that have been made up to and including
May 2013.
The manual is valid for:
The Aristo RoboFeed 30-4 and RoboFeed 3004w are designed and tested in
accordance with international and European standard IEC/EN 60974-5. On completion
of service or repair work, it is the responsibility of the person(s) performing the work
to ensure that the product still complies with the requirements of the above standard.
CAUTION!
Read and understand the instruction manual before
installing or operating.
The wire feed unit is renamed:
New name
RoboFeed 3004w
0740 800 169
Aristo RoboFeed 30-4 with serial no. 501-xxx-xxxx
RoboFeed 3004w with serial no. 620-, 745-, 310-xxx-xxxx
Old name
Aristo RoboFeed 30-4
- 3 - © ESAB AB 2014