Table of Contents
Advertisement
Operation
To start cooking
Turn on the main power supply, the buzzer beeps once and all the indicators light up for 1 se-
cond then goes off, indicating that the hob has entered the state of standby mode.
1.
Touch the ON/OFF
show "- "
2.
Place a suitable pan on the desired cooking zone
(Make sure the bottom of the pan and the surface
of the cooking zone is clean and dry.)
3.
Select the cooking zone by touching the relevant heating zone,
the indicator next to the selected zone will flash. The default power
level setting is 5.
4.
Select a heat setting by touching the slider control (between minimum
"1" and maximum "9") – slider your finger along the selector or touch at one point to "jump" to
a specific setting. You can modify the heat setting at any time during cooking.
Note: If a cooking zone is not turned on within 1 minute, the induction hob will automatically
switch off. You will need to start again at step 1.
To end cooking
1.
Select desired heating zone.
2.
Turn the cooking zone off by scrolling down or direct select the power level to
sure the display shows"0".
control. All the indicators
or
9
"0".
Make
Hide quick links:
Advertisement
Table of Contents
