EF HB BI 583 A User Manual page 15

5. Set the time by touching the slider control (e.g. set the first digit as"9"), and the time is set
at 95 minutes.
6. When the time is set, it will begin to count down immediately. The display will show the
remaining time.
NOTE: The red dot next to the power level indicator
will be lighted, indicating that relevant zone is selected for timer
7. When cooking timer is ended, the relevant cooking zone will
switch off automatically and other cooking zones will keep operating if
they are turned on previously.
NOTE: The time can be changed at any time by touching the timer control key.
If the timer is set on multiple cooking zone:

It is possible to set the cooking timer for multiple cooking zone simultaneously. To program
the timer on another cooking zone, repeat the steps as described above.

When multiple timer is activated, there will be red dot shown on each relevant cooking
zones. The timer display will show the shortest or minimum time set among the cooking
zones and the red dot of the corresponding zone will flash. For example, if the cooking
timer is set to 15 minutes for one zone and 45 minutes for the other zone, the timer display
will show 15 minutes (shortest between the 2 set zones) and the red dot of the corre-
sponding zone will flash.

Once the countdown is ended, the corresponding zone will switch off automatically. The
timer display will show the next minimum time set (in this case, 30 minutes) and the red
dot of the corresponding zone will flash.
(set to 15 minutes)
(set to 45 minutes)
15