Electrical Connection - EF HB BI 583 A User Manual

Electrical Connection

The power supply should be connected in compliance with the relevant standard, or a sin-
gle-pole circuit breaker. The method of connection is shown below.
• Electric power connection shall be carried out only by a qualified personnel
• The cooktop must be connected to the mains checking that the voltage corresponds to the
value given in the rating plate and that the electrical cable sections can withstand the load
specified on the plate.
• If the appliance is being connected directly to the mains power supply, an omnipolar circuit
breaker must be installed with a minimum gap of 3mm between the contacts.
• The cable must not near or touch any hot parts and must be positioned in such way that it
does not exceed 50°C above ambient.
• If the cable is damaged or needs replacing, this should be done by an after-sales technician
using proper tools.
• The cable must not be bent or compressed.
•
The cable must be checked regularly and only replaced by a qualified personnel.
Note: Never use adaptors, reductions or multiple power points for electric power connection as
these may overheat and catch fire.
26