Conventions And References; Warnings, Cautions, And Notes; Metric Conversion; Recommended Standard Designations - Comtech EF Data CRS-150 Installation And Operation Manual

CRS-150 1:1 Redundancy Switch
Preface

Conventions and References

Warnings, Cautions, and Notes

A WARNING gives information about a possible hazard that MAY CAUSE
DEATH or SERIOUS INJURY.
A CAUTION gives information about a possible hazard that MAY CAUSE
INJURY or PROPERTY DAMAGE.
A NOTE gives important information about a task or the equipment.
A REFERENCE directs the user to additional information about a task or the
equipment.

Metric Conversion

Metric conversion information is located on the inside back cover of this manual. This information
is provided to assist the operator in cross-referencing non-metric to metric conversions.

Recommended Standard Designations

Recommended Standard (RS) Designations have been superseded by the new designation of the
Electronic Industries Association (EIA). References to the old designations are shown only when
depicting actual text displayed on the screen of the unit (RS-232, RS-485, etc.). All other
references in the manual will be shown with the EIA designations (EIA-232, EIA-485, etc.) only.

Trademarks

All product names mentioned in this manual may be trademarks or registered trademarks of their
respective companies and are hereby acknowledged.
viii
Revision 2
MN/CRS150.IOM