Table 1 :802 Model Description Format - TDK-Lambda 802 Series Operator's Manual

1.7.6. Use extreme caution when connecting AC input power, and never apply the incorrect
input voltage, refer to ratings label.
1.7.7. Use extreme caution when connecting the high voltage output cable to the load.
1.7.8. Ensure all load capacitors are completely discharged prior to connection. Never
handle the output cable when the power supply is operating.
1.7.9. Never attempt to operate the power supply in any manner not described in this
manual.
1.7.10. Never remove DANGER and WARNING labels from the power supply. Replace lost
or damaged labels immediately.
1.7.11. The power supply should only be serviced by factory authorized personnel.
1.7.12. No user maintenance is required.
1.8. Model Number Format
The model numbering system for the 802 Series power supply includes symbols for features
and options. They are separated by dashes.
Examples are: 802L-10kV-POS-400VAC and 802S-20kV-POS-DC.
The 802 is available with three front panel configurations, the L, S, and OEM. The choice of
panel configuration is dependent upon the installation and system requirements. See section
5 for further details.
Table 1 shows a partial listing of the model description format for the 802 Power Supply
family. For additional options, the customer may contact the Sales Department at TDK-
Lambda Americas. Special options are typically shown as a four-digit suffix to the model
number.

Table 1 :802 Model Description Format .

83488001 Revision N
8