Delta (Del) - ABB COM600 Station Automation Series User Manual

DNP 3.0
LAN/WAN Master
(OPC) 3.2
3.4.8.8.
34
COM600 Station Automation Series
User's Guide
Property/ Para- Value or Value range/ Default
meter
Multiplier Default: Deka
Phase Number of Default: 0
Decimals
Scale Default: None
Unit Default: Dimensionless
Limit Value Super-
vision
Max
Min
Table 3.4.8.7-2 Additional configurable properties for Sub-Type Limit Check
Property/ Para- Value or Value range/ Default
meter
Sub-Type Limit Check
Limit Value Super-
vision
High Default: 0
High-High Default: 0
Low Default: 0
Low-Low Default: 0

Delta (DEL)

Table 3.4.8.8-1 Configurable DEL properties for OPC client
Property/ Para- Value or Value range/ Default
meter
Basic
Common Data DEL
Class
Addresses
Phase AB Index -1 to 65535
Default: -1
Description
Specifies the multiplier for current SI unit.
Specifies the number of decimals shown
in HSI. (0 to 9)
Scale to be used with this type.
SI unit for measurement as described in
IEC61850
Maximum value for measurement
Minimum value for measurement
Description
MVSubTypeDescription
High limit for measurement. Event is cre-
ated when value crosses the limit.
High-high limit for measurement. Event is
created when value crosses the limit.
Low limit for measurement. Event is cre-
ated when value crosses the limit.
Low-low limit for measurement. Event is
created when value crosses the limit.
Description
Common data class according to IEC
61850.
Phase AB Index
1MRS756566