ABB COM600 Station Automation Series User Manual page 44

DNP 3.0
LAN/WAN Master
(OPC) 3.2
44
COM600 Station Automation Series
User's Guide
Property/ Para- Value or Value range/ Default
meter
Indication Object Analog input (30, 32)
Analog output (40)
Default: Analog input (30, 32)
Scale and Unit
Neutral Multiplier Default: Deka
Neutral Scale Default: None
Neutral Unit Default: Dimensionless
Neutral Number of 0 to 9
Decimals
Default: 0
Phase Multiplier Default: Deka
Phase Scale Default: None
Phase Unit Default: Dimensionless
Phase Number of 0 to 9
Decimals
Default: 0
Phase Limit Value
Supervision
Max Default: 20000
Min Default: 0
Neutral Limit Value
Supervision
Max Default: 20000
Min Default: 0
Table 3.4.8.19-2 Additional configurable properties for Sub-Type WYE Full
Property/ Para- Value or Value range/ Default
meter
Sub-Type WYE Full
Phase Limit Value
Supervision
High Default: 0
High-High Default: 0
Description
Object number for indication.
Specifies the multiplier for the current SI
unit.
Scale for neutral to be used with this data
object.
Unit for Neutral phase
Specifies the number of decimals shown
in HSI
Specifies the multiplier for the current SI
unit.
Scale for phases to be used with this data
object.
Unit for phases
Specifies the number of decimals shown
in HSI
Maximum value for measurement.
Minimum value for measurement.
Maximum value for measurement.
Minimum value for measurement.
Description
Subtype of WYE
High limit for measurement. Event is cre-
ated when value crosses the limit.
High-high limit for measurement. Event is
created when value crosses the limit.
1MRS756566