ABB COM600 Station Automation Series User Manual page 25

1MRS756566 COM600 Station Automation Series
User's Guide
Name Value or Value range/ Default
In Use In use
Not in use
Default: In use
Simulation Mode True
False
Default: False
Event only with True
changed value
False
Suppress event on True
first update
False
Addresses
Internet Address 127.0.0.1
Master Address 0 to 65535
Default: 1
Slave Address 0 to 65535
Default: 1
Communication
Control
Allocating Applica- 0 to 32
tion
Default: 0
Automatic Suspen- True
sion
False
Default: False
Event Offset 0 to 65535
Default: 0
Pulse Length Off 0 to 65535
For Control Relay
Default: 0
Output
Pulse Length On 0 to 65535
For Control Relay
Default: 0
Output
Static Datapoll True
False
Default: True
LAN/WAN Master
Description
Controls whether the device communica-
tion is initially in use or not.
Specifies whether the device is in simula-
tion mode or not.
If True, then no events will be generated
for IED if the new value and quality are the
same as the current value and quality.
If True, no is event generated when the
item tag is updated for the first time.
Defines the internet address of this IED.
Station address of the master station.
Station address of the DNP 3.0 slave sta-
tion.
Allocating application of the station.
When true, consequent application layer
response timeouts set the station to sus-
pended state and the corresponding pro-
cess objects are set to invalid state.
Address offset between the process
objects for static data and events with the
same DNP 3.0 address (index).
Then length of pulse in milliseconds used
in the output commands of the control
relay.
Then length of pulse in milliseconds used
in the output commands of the control
relay.
When True, a static data (class 0) poll
request is always sent when the object
status of the DNP master station gets the
value zero (0).
DNP 3.0
(OPC) 3.2
25