Charting And Logging; Figure 22 Chart/Log Control Panel Window - Michell Instruments OptiCal User Manual

APPLICATION SOFTWARE
5.4

Charting and Logging

Clicking on the
Chart / log control panel
The chart, in its default confi guration, displays dew point, temperature and %RH.
However, gm
box.
Within the
Global
minimum of 5 seconds to a maximum of 1 hour. It offers the facility to log the temperature
of the mirror while in
and chart the held data values accordingly.
To log the measured and calculated humidity values to a data fi le for further analysis,
click on the check box in the
button. If a log fi le is not required simply uncheck the box.
Browse
To ,
Run Pause
accordingly.
26
button in the
Chart/log
window.
Figure 22 Chart/Log Control Panel Window
, gkg and ∆(t – t ), can be added by clicking in the appropriate check
-3 -1
dp
section, you can select the charting and logging interval from a
and
DCC Hold
Logging
and the charting and logging facility, use the chart control buttons
Stop
OptiCal User's Manual
Virtual Hygrometer
, or hold the measured value while in these modes
section and specify a fi le name by clicking on the
97079 Issue 9.2, March 2016
window brings up the