2. Install riser line (3) onto pan. First
install line into elbow (4) on bottom
center of pan while handle fits over
studs (5) on front of pan.
3. Install keps nuts (6) onto studs (5) but
do not tighten.
4. Tighten nut onto elbow (4).
Elbow may have to be
turned with a wrench if nut
will not start onto elbow.
5. .Lubricate O-ring (7) with cooking oil.
1600: Install O-ring (7) into inner
groove in suction line (6). Screw nipple
(9) into drain valve (10).
1800: Install O-ring (7) into groove on
riser line (3).
6. Install filter pan under unit and align
riser line (3) with suction line (8).
7. Tighten keps nuts (6) mounting riser
line (3) to filter pan.
8. See Operation Manual for additional
assembly.
2-2
broaster.com Manual #14678 1/99 Rev 2/14