Table of Contents
Advertisement
To read EIDs, weigh and draft by weight
1.
Set up the scale indicator so it is ready to weigh animals automatically and
specify the weight limits for each group. Make sure the RFID reader is also
attached.
2.
Press the green Start button
Gate button on the Control Bridge for 2 seconds or more.
• The white LED mode lamps will now be on to indicate that you are in
• The entry gate will open. Once a sheep has entered the entry gate will
To read EIDs, weigh and draft by list
1.
Make sure the RFID reader is connected. Set up the scale indicator so it is
ready to weigh animals automatically and to read EIDs. Then select a draft
list.
2.
Press the green Start button
Gate button on the Control Bridge for 2 seconds or more.
• The white LED mode lamps will now be on to indicate that you are in
• The entry gate will open. Once a sheep has entered the entry gate will
Page 34
Automatic Release Mode.
close to capture it. When the EID has been read and the sheep has
been successfully weighed the scale indicator will beep. The scale
indicator will display both the animal's weight and the direction it
will be drafted in. The exit gate will open and the sheep will be
drafted according to the weight limits set up in the scale indicator.
Automatic Release Mode.
close to capture it. When the EID has been read and the sheep has
been successfully weighed the scale indicator will beep. The scale
indicator will display both the animal's weight and the direction it
will be drafted in. The exit gate will open and the sheep will be
drafted according to the conditions set up in the scale indicator.
3E2374 Sheep Auto Drafter User Manual
on the remote control or press the Entry
on the remote control or press the Entry
Advertisement
Table of Contents
