Table of Contents
Advertisement
3E2374 Sheep Auto Drafter User Manual
To weigh and draft animals (draft by weight)
1.
Set up the scale indicator so it is ready to weigh animals automatically and
specify the weight limits for each group.
2.
Press the green Start button
Gate button on the Control Bridge for 2 seconds or more.
• The white LED mode lamps will now be on to indicate that you are in
• The entry gate will open. When a sheep has entered the entry gate
To read EIDs
1.
Connect the loop back cable into the socket on the Control Bridge, instead
of the scale indicator, so that the load cells are not connected.
To find out how to do this see Using without a scale attached (p 38).
2.
Set up the scale indicator to read EIDs. Make sure the RFID reader is also
attached.
3.
Press the green Start button
Gate button on the Control Bridge for 2 seconds or more.
• The white LED mode lamps will now be on to indicate that you are in
• The entry gate will open. Once a sheep has entered the entry gate will
To read EIDs and draft by list (not weighing)
1.
Connect the loop back cable into the socket on the Control Bridge, instead
of the scale indicator, so that the load cells are not connected.
To find out how to do this see Using without a scale attached (p 38).
2.
Make sure the RFID reader is connected. Set up the scale indicator to read
EIDs and select a draft list.
3.
Press the green Start button
Gate button on the Control Bridge for 2 seconds or more.
• The white LED mode lamps will now be on to indicate that you are in
• The entry gate will open. Once a sheep has entered the entry gate will
Automatic Release Mode.
will close to capture it. Once the sheep has been successfully
weighed the scale indicator will beep. The scale indicator will display
both the animal's weight and the direction it will be drafted in. The
exit gate will open and the sheep will be drafted according to the
conditions set up in the scale indicator.
Automatic Release Mode.
close to capture it. When the EID has been successfully read the exit
gate will open and the sheep will be released.
Automatic Release Mode.
close to capture it. When the EID has been successfully read the exit
gate will open and the sheep will be drafted according to the
conditions set up in the scale indicator.
on the remote control or press the Entry
on the remote control or press the Entry
on the remote control or press the Entry
Page 33
Advertisement
Table of Contents
