3E2374 Sheep Auto Drafter User Manual
inside. The door pivot tubes should be inserted with the white bolt guide
into the roof.
4.
Attach the floor by inserting the door pivot tubes and tie bars into the holes
in the floor (the back and front tubes are different sizes - those at the
drafting gate end are smaller, so make sure you have the floor around the
right way). Keeping the floor level as you push it on will make the job easier.
5.
Drop the 4 through bolts into each corner of the floor and tighten (do not
over tighten).
Tool required: 13mm socket.
Page 17