Table of Contents
Advertisement
6.
Fasten the two air cylinders to the doors by attaching lock nuts and washers
(m10 nut, 10mm flat washer) to the end of each one.
Tool required: 17mm combination spanner.
To find out how to attach the sorter to the Auto Drafter see Connecting the
sorting unit to the Sheep Auto Drafter (p 20), under "Using the Sorting Unit"
on page 35 later in this manual.
Adding an extra sorting unit
An extra sorting unit can be attached to the first, end to end using 2 zinc plated
hex bolts (M6 x 75mm long) and flat washers (6mm x 22mm long).
Note: When weighing animals it is very important that there is nothing touching
the Sheep Auto Drafter as this may affect its accuracy. Take care that the sorter
is attached correctly and any lead up races are not touching the Auto Drafter.
Page 18
3E2374 Sheep Auto Drafter User Manual
Advertisement
Table of Contents
