Table of Contents
Advertisement
Connecting the sorting unit to the Sheep Auto Drafter
Method
1.
Sit the sorting unit about 150mm away from the Sheep Auto Drafter and
insert the air lines through the conduit at the top of the sorting unit.
Figure 8. Inserting air lines.
2.
Slot the sorting unit onto the spigots protruding upwards from the Sheep
Auto Drafter foot. Screw them together with Tek screws (14 gauge 75mm).
Tool required: 3/8in socket.
Figure 9. Attaching to Sheep Auto Drafter.
3.
Attach the male and female connections on the end of the air lines to their
mates inside the roof of the sorting unit. Check the air lines are not sagging
as they may get caught when the doors operate.
Figure 10. Attaching air lines.
Page 20
3E2374 Sheep Auto Drafter User Manual
Advertisement
Table of Contents
