KVH Industries TracPhone V3-HTS Installation Manual page 7

2 Continued
Prevent RF Radiation Exposure
Select a location that is well above any areas
accessible to passengers and crew to reduce the
risk of RF radiation exposure. (See page 1 for an
illustration of the hazard area.)
If mounting the antenna near an accessible area is
unavoidable, you may configure one or two no-
transmit zones to prevent transmissions in
hazardous directions. (See "Set Up No-Transmit
Zones" on page 23 for details.)
Minimize Satellite Blockage
The antenna requires a clear view of the sky to
transmit and receive satellite signals (see
Figure 4). The fewer obstructions, the better the
system will perform.
Avoid RF Interference
Although many variables determine the exact
distance required between the antenna and
radar/high-power radio transmitters, including
transmitter beam properties and the reflective
properties of nearby surfaces, consider the
following general guidelines when selecting a
safe antenna location:
IMPORTANT!
RF emissions from radars and high-power
radio transmitters may damage the antenna
or impair its performance if it's improperly
positioned within the beam path.
• Mount the antenna as far away as possible
from the radar and high-power radio
transmitters.
• Do not mount the antenna at the same level
as the radar. Most radar transmitters emit RF
energy within an elevation range of -15° to
+15° (see Figure 5). Therefore, mount the
antenna outside this elevation range and at
least 10 ft (3 m) away from the transmitter.
IMPORTANT!
Never place the antenna in the beam path of
the radar regardless of distance. Radar energy
may damage the antenna or impair its
performance.
6
Plan the Antenna Installation
Figure 4: Blockage from Obstruction
Blocked!
Mast
Figure 5: Avoiding RF Interference
Radar
7.7° to 75°
Look Angle
Vessel Platform
Antenna
10 ft (3 m)
Minimum
Potential RF
Interference
Antenna
Antenna
Antenna