KVH Industries TracPhone V3-HTS Installation Manual page 28

17 Continued
k. At Step 4, enter the satellite parameters
provided by the NOC (see Figure 50). Verify
that the Frequency and the FL Carrier Symbol
Rate match the values on the worksheet, and
enter zeros for Latitude Variance and
Polarization Skew.
When you are done, click Continue and
position antenna (see Figure 50).
l. At Step 5, wait until you see the following
(see Figure 51):
• Demod Lock Status: Locked
• Antenna Status: Functional, May
Transmit
Then click Stop Antenna pointing.
Commission the Modem
Figure 50: Commissioning Process – Step 4
Figure 51: Commissioning Process – Step 5
27