KVH Industries TracPhone V3-HTS Installation Manual page 27

17 Continued
e. At Step 1, click Enter Commissioning Mode
(see Figure 47).
f. At Step 2, click Continue without changes
(see Figure 48).
IMPORTANT!
If you need to abort commissioning at any
time, select Exit commissioning mode.
Cycling power will not revert the ICM to normal
operation mode.
g. At Step 3, enter your latitude and longitude
(see Figure 49).
NOTE: Select the direction (North/South, East/West)
before entering each value.
h. Enter the orbital slot (longitude) of the
satellite the antenna is tracking.
NOTE: Select the direction (East/West) before
entering the value.
i. Click Save remote location and continue (see
Figure 49).
j. Call KVH Technical Support to continue the
commissioning process with the Network
Operations Center (NOC). You will need to
provide the information you noted on the
Modem Commissioning Worksheet. KVH
will walk you through all remaining steps.
26
Commission the Modem
Figure 47: Commissioning Process – Step 1
Figure 48: Commissioning Process – Step 2
Figure 49: Commissioning Process – Step 3