Rts (Rf) Parts In The Box; Rts - Rf Control & Running - Screen Innovations Solo Pro Installation Instructions Manual

24v RTS (RF)
Parts in the box
Solo Pro Screen
Low Voltage Power Supply
Quick-mount wall brackets
w/ wood fasteners
RTS / Parts in the Box
PWR
RF
Remote
10
RTS - RF CONTROL
1. Connect the power supply - Solo Pro with an RTS
motor is shipped with the remote already paired to
the screen. Plug the power supply into the wall and
plug the connectors together.
2. The screen is ready for operation.
RUNNING
Solo Pro is very easy to operate. The RF remote,
supplied with the screen, controls the opening and
closing from up to 40 feet away. Enjoy!
RF controlled projection screens operate at
433.42MHz. Minimize or eliminate any sources of RF
interference and shielding. Any metal, wire, or foliage
can reduce or block the signal - reducing the operating
range of the controls. Other nearby transmitters may
cause interference also.
RTS / Running 11