Programming - Screen Innovations Solo Pro Installation Instructions Manual

PROGRAMMING

Setting the Drop - Solo Pros are factory preset to have
1" of drop, the distance between the top of the viewing
area and the cassette. The drop can be changed to be
up to 12"(4" for Short Throw) to adjust the viewing area
vertically for image placement. NOTE: To change any
motor settings, a Somfy Sonesse 30 DCT Limit Setting
Tool (Part # 9014599, sold seperately by Somfy) is
required. To adjust the drop, see the instructions with
the DCT Limit Setting Tool.
DO NOT set the lower limit (top of viewing) more
than 12" (4" for Short Throw) from the cassette.
Doing so risks damaging the screen material.
30 DCT / Programming 18 30 DCT / Programming
1" - 12"
Drop 1" set
at factory up to 12" Max
NOTE: Max. drop for Short Throw is 4".
WHT/ BLU
DCT
BLU
WHT/ ORG
ORG
UP
STOP
DOWN
19