Dry Contact Parts In The Box; Running - Screen Innovations Solo Pro Installation Instructions Manual

24v Dry Contact
Parts in the box
Solo Pro Screen
Quick-mount wall brackets
w/ wood fasteners
30 DCT / Parts in the Box
PWR DCT
Low Voltage
Power Supply
Spare Connectors
The supplied control cable is used with dry contacts
(by others) from a relay or other controls to operate the
powered screen. There is no sleep mode for this low
voltage motor. Connect the power plug and connector
together to power the motor. Since the screen is
controlled by dry contact controls, there is no RF or IR
remote with your screen.

RUNNING

Solo Pro with a DCT motor is very easy to operate.
The upper and lower screen limits are preset from the
factory. The controls (by others) run the screen up and
down to each limit using the DCT cable supplied with
the screen. The screen cannot be powered solely by
the DCT cable. Make sure that the low voltage power
supply is also connected.
16 30 DCT / Running 17