Start Up - Screen Innovations Solo Pro Installation Instructions Manual

Connections And Indicators for the
Somfy DecoFlex Switch
8 Dry Contact
inputs with 2
Common
Commons (see
detail to right)
Power LED
SDN Connection
SDN Connection Cable Pinouts
ORG / WHT 1 - Data +
ORG 2 - Data -
3 - N/A
4 - Power +
BLU
5 - Power +
BLU / WHT
6 - N/A
7 - Ground -
BRN / WHT
BRN 8 - Ground -
RS485 LV Motor / Connections and Indicators
Detail of Inputs
1
8
2
7
3
6
4
5
Common
Front Buttons
22
The supplied control cable is used with controls (by
others) to operate the powered screen. Connect the
power plug and connector together to power the
motor. Since the screen is controlled with hardwired
digital commands, there is no RF or IR remote with
your screen.
START - UP
The screen must have 24VDC power to operate. The
control wiring cannot power the motor. Connect the in-
line power plug and connector together to supply motor
power. Verify the control wiring.
See SIFI Programming Guide for SIFI setup.
RS485 LV Motor / Start Up 23