Screen Innovations Solo Pro Installation Instructions Manual page 5

4. Determine the desired viewing area with vertical
centerline of the projected viewing area.
5. The Solo Pro screen must be installed with the
brackets no more than 10 inches from each end of
the cassette. Measure the overall length of the
cassette to determine the min. and max. horizontal
spacing of the mounts. Mark the location of the quick
mount brackets over a stud and within an appropriate
distance from the ends. If the location of the studs
does not let the screen center match the projector
center, another board or plate will have to be installed
on the wall to take the mount fasteners.
6. Remove the snap-on cover (Item 2) from one of the
supplied quick mounts.
Installation
Center Line of Viewing Area
4 Installation
Wall Brackets
secured to studs
or structural
View Height
supports
Wood Studs
or other Structure
5