4.1
Product CD/DVD
The OMNI-3155-UP comes with a product DVD that contains all the drivers and utilities
you need to setup your product. Insert the DVD and follow the steps in the autorun
program to install the drivers.
In case the program does not start, follow the sequence below to install the drivers.
Step 1 – Install DriverPackage
1.
Open the Step1–DriverPackage folder
2.
Open the Setup.exe file
3.
Follow the installation instructions
4.
Drivers should be installed automatically
5.
If the drivers don't install, copy the entire Step1–DriverPackage folder to
your computer's C: drive, open the Setup.exe file and follow the instructions. The
drivers should then install.
Step 2 – Install TrustExecutionEngine Driver
1.
Open the Step2-TrustExecutionEngine folder
2.
Open the SetupTXE.exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Step 3 – Install USBHub Driver
1.
Open the Step3–USBHub folder
2.
Open the .exe file in the folder
3.
Follow the instructions
4.
Drivers will be installed automatically
Chapter 4 – Driver Installation & Touchscreen Settings
40