Table of Contents
Advertisement
CINEMA MODE
In AUTO the deinterlacer recognises if the video signal source
is a movie film (obtained from a Telecine device with 3:2 or 2:2
pull-down) and applies a deinterlace algorithm optimised for
this type of signal.
If the video signal source is not identified as a film, or if you
select NO the deinterlacer applies a Motion compensated al-
gorithm optimised for video camera signals.
VIDEO TYPE
Activates a filter to improve stability of pictures from video
recorders. To toggle between NORMAL, VCR1 mode and VCR2
mode press
on the remote control.
NOISE REDUCTION
This adjustments allows to choose the filter value for noise
reduction purposes.
As soon as this option is selected on the menu, the image is
divided in two parts.
TABLE 1 - INPUT SIGNALS AND ADJUSTABLE/SETTING ITEMS
ADJUSTEMENTS
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
SHARPNESS MODE
FILTER
CINEMA MODE
VIDEO TYPE
NOISE REDUCTION
FLESH TONE CORRECTION
-
Adjustable/can be set
Not adjustable/can not be set
Video
RGBS 15kHz
S-Video
YCrCb 15kHz
(NTSC)
-
-
17
In the left side the image is not altered by the filter, in the right
part the filter is activated.
This allows you to compare the effect of the filter.
It is possible to deactivated the filter (NOT ACTIVE), to use the
automatic adjustments (AUTO) or to manually select (MANUAL)
the value suitable for the image with the VALUE adjustment.
In case of using the VALUE adjustement, it is enoght to select
to cursor below and set the value with the fl / ‡ keys of the
remote control.
Associated to the NOISE REDUCTION there is the possibility to
use the specific function (FLESH TONE CORRECTION) to make
skin tone more natural. Often the use of noise reduction filter
slightly degrades the image in those areas where skin tones are
visible. With the use of this function it is possible to maintain an
excellent image quality throughout the entire projected image.
INPUTS
RGBS
YCrCb
-
-
-
-
-
-
-
-
-
-
-
-
RGB Grafico
HDMI™
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Advertisement
Table of Contents
Need help?
Do you have a question about the HT 280E and is the answer not in the manual?
Questions and answers