Subscribe to Our Youtube Channel
Related Manuals for Sim2 HT 300XTRA-H
Summary of Contents for Sim2 HT 300XTRA-H
- Page 1 User and Installation Manual The home theater projector HT 300XTRA-H HT 280 Downloaded From projector-manual.com Sim2 Manuals...
- Page 2 Displays the selected source information and the projector status. FOCUS Select focus lens adjustment Improves the video recorder AUTO signals quality. Selects Auto Adjust (automatic optimisation of the displayed image). ASPECT Selects image Aspect ratio. Downloaded From projector-manual.com Sim2 Manuals...
- Page 3 1 INTRODUCTION Congratulations and thank you for choosing a Gran Cinema HT projector, a SIM2 Multimedia SpA product (Fig. 1) . omettr ne pas compr d'incen type TION: tion contre pour les resque de meme ATTEN la protec cer par...
- Page 4 DVD of a good quality screen and surround-sound system. Contact players, analogue and digital VCRs, analogue and digital sa- your nearest authorized SIM2 Multimedia dealer for further details. tellite receivers and personal computers etc.
- Page 5 . on ly tin g fu an d ra S-Video input VGA input RGB / YCrCb input HDMI™ input Optical Audio Output 12Vdc screen output RS232 interface connector Downloaded From projector-manual.com Sim2 Manuals...
-
Page 6: Important Safety Instructions
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. Downloaded From projector-manual.com Sim2 Manuals... - Page 7 Do not pour or drop fluids in the vents. • Always position the projector away from direct heat sources. • Do not use the projector when the room temperature is above 35°C (95°F). Downloaded From projector-manual.com Sim2 Manuals...
-
Page 8: Packaging And Contents
- four 1.5V AAA batteries (for remote control) for future use and in the unlikely event that your projector needs - three power cables (EU, UK, USA) to be returned for repair. - the user manual. Downloaded From projector-manual.com Sim2 Manuals... -
Page 9: Installation
FOCUS will find in the box together with the bracket. If you use a bracket different to the one supplied by SIM2 Multimedia, you must make sure that the projector is at least 65 mm (2-9/16 inch) from the ceiling and... - Page 10 (Fig. 11) . For front projection, we recommend the use of screens with low gain specifications (i.e. 1.3 to 2). The use of high gain screens should be avoided due to their limited viewing angle, Downloaded From projector-manual.com Sim2 Manuals...
-
Page 11: Switching On And Off The Projector
: fo r co T IO N pl ac e C A U fir e, re ty pe ris k of sa m e w ith se . on ly tin g fu an d ra Fig. 14 Downloaded From projector-manual.com Sim2 Manuals... -
Page 12: Switching Off And Returning To Stand-By
Fig. 16 - Remove cables by the plug and do not pull on the cable itself. - Avoid tangled cables. - Position the cables carefully to avoid a trip hazard - especially in low light areas. Downloaded From projector-manual.com Sim2 Manuals... -
Page 13: Composite Video Input
RCA connectors use the colours as a guide: connector R is Composite Sync (Fig. 19) . This input accepts a Horizontal Scan red, G is green, B is blue and HV is white. By using a suitable Downloaded From projector-manual.com Sim2 Manuals... -
Page 14: Motorised Projection Screen Output
The +12V output is activated when the projector is switched on (green LED on) and is de-activated when the projector is in stand-by mode (red LED on). The output can be used to control a screen masking system; Downloaded From projector-manual.com Sim2 Manuals... -
Page 15: Keyboard Pad
De-activates the On Screen Display and Navigate through and make adjustments to the gives access to the lens Zoom/Focus On Screen menus. adjustment functions. Arrow Up/Down switch on from stand-by and recall Source Selection menu. Downloaded From projector-manual.com Sim2 Manuals... -
Page 16: Remote Control
Avoid placing obstructions between the remote control and the with new batteries. infrared sensor at the front of the projector; this will impair the remote control performance. Downloaded From projector-manual.com Sim2 Manuals... -
Page 17: On Screen Menu
As with the other inputs, you can now select the input just set by pressing the key. During the short time it takes to find the signal, a box appears showing the signal requested. As soon as the signal is shown Downloaded From projector-manual.com Sim2 Manuals... - Page 18 Alternatively use a scene composed of black objects alongside other dark coloured objects. Downloaded From projector-manual.com Sim2 Manuals...
-
Page 19: Cinema Mode
ADJUSTEMENTS RGBS YCrCb RGB Grafico HDMI™ S-Video YCrCb 15kHz BRIGHTNESS CONTRAST COLOR TINT (NTSC) SHARPNESS SHARPNESS MODE FILTER CINEMA MODE VIDEO TYPE NOISE REDUCTION FLESH TONE CORRECTION Adjustable/can be set Not adjustable/can not be set Downloaded From projector-manual.com Sim2 Manuals... - Page 20 User formulas are available, with the facility for continuous horizontal and vertical adjustment of picture size. POSITION Use this adjustment to position the image vertically and horizontally. Determines the aspect ratio of the projected image. These parameters do not normally require adjustment because Downloaded From projector-manual.com Sim2 Manuals...
- Page 21 TABLE 2 INPUT SIGNALS AND ADJUSTABLE/SETTING ITEMS INPUTS Video RGBS 15kHz ADJUSTEMENTS RGBS YCrCb Graphic RGB HDMI™ S-Video YCrCb 15kHz POSITION ASPECT FREQUENCY PHASE COLOR TEMPERATURE GAMMA CORRECTION OVERSCAN Y/C DELAY Adjustable/can be set Not adjustable/can not be set Downloaded From projector-manual.com Sim2 Manuals...
- Page 22 ATTENTIO la protection contre un fusible de meme tique remplace r par mems caracteris protection against et de CAUTION fire, replace : for continued risk of with same type only and rating fuse. Fig. 32 Downloaded From projector-manual.com Sim2 Manuals...
-
Page 23: Test Patterns
If one or more inputs are not utilized, it is often helpful to blank them from the input list (accessed with the 0 key). Once the input has been chosen, in the drop menu that appears by pressing the key, it is possible to activate the source (Fig. Downloaded From projector-manual.com Sim2 Manuals... -
Page 24: Source Information
Allows the On Screen Display to be positioned in a particular area of the projected image. The OSD can be positioned using Fig.35 the arrow keys for fine adjustments or keys 1...9 on the remote control to select one of 9 preset positions. Downloaded From projector-manual.com Sim2 Manuals... - Page 25 (with a maximum length of 12 alphanumeric characters) to a Memory, select the option ‘Rename’ from the correspond- ing pull-down menu. Enter the text following the procedure in- dicated in paragraph “SOURCE LIST”. Fig.36 Downloaded From projector-manual.com Sim2 Manuals...
-
Page 26: Quick Menus
Use a soft slightly damp cloth. Do not use abrasive cleaners, cleaning) to remove fingerprints and grease marks. solvents or other harsh chemicals, as this will damage the finish of the cover. Avoid direct cleaning of the rear panel’s screen- Downloaded From projector-manual.com Sim2 Manuals... -
Page 27: Troubleshooting Guide
- Adjust Frequency and Phase parameters, found in the specifications of the projector. Image Adjustments menu, to optimise vertical detail of - Check the integrity of cables connecting projector to various the projected image. sources. Downloaded From projector-manual.com Sim2 Manuals... -
Page 28: Optional Accessories
12 OPTIONAL ACCESSORIES You can purchase the following optional accessories at your Use only original, or SIM2 Multimedia approved, Dealer: accessories. CAUTION: for ceiling/wall installation, by means of - Wall/Ceiling Bracket Kit. -
Page 29: A Technical Specifications
8000 hours (average value measured in the laboratory under optimal condi- in the laboratory under optimal condi- tions; it can be sensibly reduced by tions; it can be sensibly reduced by the unit misusing) the unit misusing) Downloaded From projector-manual.com Sim2 Manuals... - Page 30 10% to 90% relative humidity non- condensing Output : Optical Digital Audio on TOSLINK Safety: EN 60950, UL 60950 connector Transportability: desktop equipment Electromagnetic EN 55022 Class B compatibility: EN 55024 EN 61000-3-2 EN 61000-3-3 Transportation: IEC 68-2-31, IEC 68-2-32 Downloaded From projector-manual.com Sim2 Manuals...
-
Page 31: Projection Distances
(Fig.37b) . If the distance “H” between the centre of the screen and the centre of the lens exceed Hmax, it is necessary to tilt the projector and use the digital keystone to correct the image projected. (Fig.37a) (Fig.37b) Downloaded From projector-manual.com Sim2 Manuals... - Page 32 4’ 1” 144” 5’ 7” 28’ 9” 12,1 39’ 7” 200" 4’ 6” 160” 6’ 2” 31’ 11” 13,4 44’ 0” 220" 4’ 11” 166” 10,7 35’ 1” 250" 5’ 8” 200” 12,2 39’ 11” Downloaded From projector-manual.com Sim2 Manuals...
- Page 33 4’ 3” 120" 94” 24’ 0” 10,1 33’ 1” 5’ 10” 150" 118” 5’ 3” 30’ 0” 12,6 41’ 4” 7’ 3” 180" 6’ 4” 142” 11,0 36’ 0” 200" 7’ 3” 157” 12,2 40’ 0” Downloaded From projector-manual.com Sim2 Manuals...
-
Page 34: On Screen Menu Layout
Horizontal Panoramic Red Offset User Vertical Pixel to Pixel Green Offset Screen control User 1 Blue Offset User 2 Red Gain Horizontal Green Gain User 3 Vertical Blue Gain Screen control Horizontal Vertical Screen control Downloaded From projector-manual.com Sim2 Manuals... - Page 35 3 COMPONENT / RGBS COMP RGB 3 Name 4 GRAPHICS RGB GRAPH RGB 4 HDMI HDMI 5 ()?@ Edit source name _ _ _ _ _ _ _ _ _ _ _ PQRS WXYZ Cancel Confirm Downloaded From projector-manual.com Sim2 Manuals...
- Page 36 S MEMORY 1 Save current settings ()?@ Edit memory name S MEMORY 2 Save initial settings _ _ _ _ _ _ _ _ _ _ _ Rename S MEMORY 3 PQRS WXYZ Cancel Confirm Downloaded From projector-manual.com Sim2 Manuals...
- Page 37 CLEANING AND MAINTENANCE RGB/YCrCb Input TROUBLESHOOTING GUIDE HDMI™ OPTIONAL ACCESSORIES Motorised projection screen output TECHNICAL SPECIFICATIONS 232 interface connector DIMENSIONS 7 KEYBOARD PAD PROJECTION DISTANCES 8 REMOTE CONTROL ON SCREEN MENU LAYOUT 9 ON SCREEN MENUS Downloaded From projector-manual.com Sim2 Manuals...
- Page 38 S.p.a. Phone +39.434.383.253-256 • Fax +39.434.383260-261 www.sim2.com • e-mail: info@sim2.it SIM2 USA Inc. • 10108 USA Today Way • 33025 Miramar FL - USA Phone +1.954.4422999 • Fax +1.954.4422998 www.sim2usa.com • e-mail: sales@sim2usa.com SIM2 Deutschland GmbH • Gewerbepark, 17 D-35606 Solms Phone 0800.800.7462 •...
- Page 39 Downloaded From projector-manual.com Sim2 Manuals...
- Page 40 Downloaded From projector-manual.com Sim2 Manuals...
Need help?
Do you have a question about the HT 300XTRA-H and is the answer not in the manual?
Questions and answers