Installation Instructions – 30070 *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING, AND USING THIS PRODUCT* Warning Always check for wires, fuel tanks and lines, brake lines and other important vehicle functionality items prior to drilling and installing all products.
Installation Instructions – 30070 Step 1 – Leg to Bedrail • Bolt leg assembly (A) to each bedrail (B&C) using four 3/8” x 1” plow bolts (6), four 3/8” flat washers (7) and four 3/8” nyloc nuts (8) in the oreintation shown.
Installation Instructions – 30070 Step 2 – Install Bedrail and Leg Assembly • Place a bedrail with leg assembly in each corner of the bed. • Have the majority of the bedrail towards the center of the bed. • Have the bend in the legs towards the center of the cab.
Installation Instructions – 30070 Step 3 – Install Crossbar • Slide crossbar in through the top of each leg. • Be sure there is equal distance from the leg to the end of the crossbar while maintaining a flat bed rail mount.
Installation Instructions – 30070 Step 4A – Stake Pocket • Find stake pocket on bed rail. In some situations, the plastic needs to be cut out to expose the metal stake pocket. • Place a 3/8” x 2-1/2” button head (5) through the hole in the top of the bed rail (B & C). Attach to the chevy nut (10) and place down inside of the stake pocket.
Installation Instructions – 30070 Step 4B – Under Bed Rail • Find location where the underside of bed rail is accessible. Try and pick up two locations. • Use 3/8” x 2-1/2” button head (5) and an angle mount (13) to clamp under bed rail.
Installation Instructions – 30070 Step 4C – Slot Rail • If the truck is equipped with a slot rail on the inside of the bed, make use of a weldment (11 or 12). • Determine which weldment will work with the rail based on the width of the rail.
Page 11
Installation Instructions – 30070 • If using the large pemstud, attach using a 5/16” flat washer (3) and 5/16” nyloc nut (4). • If installing on a Tacoma, bolt through the two holes on pemstud assembly into the truck. Align and square rack to your liking.