Step 3 Install Crossbar; Step 4 Mount Bedrails - Kargo Master 30070 Installation Manual

Step 3 – Install Crossbar
• Slide crossbar in through the top of each leg.
• Be sure there is equal distance from the leg to the end of the crossbar while maintaining a flat
bed rail mount.
• Some beds are more narrow in the rear than in the front. The equal distance on the crossbar
may vary from front to back.
• DO NOT TIGHTEN AT THIS POINT.
Step 4 – Mount Bedrails
• There are multiple ways to mount the bedrail depending on which truck you have.
• Some trucks have stake pockets and some trucks have a slot rail on the inside of the bed.
• One may use the under side of the bed if accessible as well.
• See next pages for various types of installations.
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Installation Instructions – 30070
Page 6