7.1
HOW TO ORDER PARTS
To assure receipt of the proper replacement parts,
supply your dealer or distributor with the following
information:
A. Model number of equipment.
Carburetor (1)
624677
1-1/8" ID x 1/8" CS
Spigot (4)
624598
5/8" ID x 1/8" CS
Middle Center Spigot (1)
624664
1-1/16" ID x 1-5/16" x 1/8
SECTION 7
REPLACEMENT PARTS
Part Number
Description
208135
Brush, Nylon: 16" x 4", Wooden Handle
208380
Brush, Nylon: 14" x 1/4", Wire Handle
208401
Brush, Nylon: 10" x 1", Wire Handle
208467
Brush, Nylon: 5-1/4" x 3/8", Wire Handle
3157992
Model ID Plate
324594
Heat Sensitive
324107
Caution, Hazardous Moving Parts
324105
Danger, Electric Shock Hazard
324106
Caution, Electric Wiring Materials
324141
Caution, Hazardous Rotating Blades
324584
Adequate Ventilation
324371
Decal, Time Delay Fuse
Front Door (1)
4" ID x 3/16" CS
Figure 76. O-Ring Identification Sheet
B. Serial number of model, stamped on nameplate.
C. Part number , p art name and quantity needed.
Common part names and numbers are listed in this
manual.
625133
59
Rear Seal (1)
624678
1-1/8" ID x 3/16" CS
Top/Bottom Center Spigot
624614
3/4" x 1.0" x 1/8"
O-Rings are drawn to
Approximate Size