Advertisement
Step
Work Description
Remove clear line shield using a 1/4" driver. (1
5
screw) Keep parts for reinstallation on new base.
Remove red arc shield using a 1/4" driver. (1
6
screw)
For fusible switches remove middle load side fuse
7
clip connector screw with 1/4" driver. Keep screw
for reinstallation.
Remove insulator screw with 1/4" driver and
remove insulator. Keep parts for reinstallation.
8
Insulator used only on 60 amp and 30 amp
Canadian models.
On fusible switches it is helpful to remove two
screws with 5/16" driver from the lower fuse base
9
and lower it out of the way . Keep screws for
reinstallation.
Revision : 1
x2
2 of 8
Reference Pictures & Comments
Advertisement
