Pfaff 3519-5/01 Instruction Manual page 42

Sewing
Program selection
These functions are used to select a program from the associated group, see also chapter
9.08 Selecting / compiling program groups.
Material thickness
This function opens a menu to change the material thickness.
Manual mode
This function displays the current operating mode and switches between manual and
automatic mode.
Presser foot up/down
This function is used to raise or lower the presser foot.
Right/left part
This function is used to turn the automatic switching between the right and left part on or
off. The part currently being processed is displayed.
Threading aid function
This function activates the threading aid, for example, see chapter 9.01 Inserting the
needle.
Stacker up/down
This function is used to move the stacker up or down.
Stop
(The function appears only during the sewing process.)
This function is used to stop the sewing process.
Start
This function is used to start the sewing sequence.
Home position
This function is used to move the machine to home position.
Move through the feed cycle
This function is used to move through the material feed cycle step by step.
Move the cycle forwards
This function is used to move forward through the sewing process step by step.
Move the cycle backwards
This function is used to move backwards through the sewing process step by step.
42