Hook Lubrication - Pfaff 3519-5/01 Instruction Manual

13

Hook lubrication

.05.05
Rule
1. The centrifugal disc 1 should be 1.5 mm in front of the oil distributor ring 3.
2. A light oil strip should appear on a paper strip held over the needle plate cutout after
approximately 10 seconds when the machine is running at full speed.
2
Fig. 13 - 06
● Adjust the centrifugal disc 1 (screw 2) according to rule 1.
● Check rule 2 and adjust the centrifugal disc 1 if necessary.
3
1
The setting is only required if the wick is replaced.
Make sure that the new wick is impregnated with oil when replacing the wick.
Adjustment
73