Alarm Feature (Alarm1 And Alarm2) - Silvercrest KH 2289 Operating Instructions Manual

Programming the kitchen timer
You can save kitchen timer periods with the
1-6
r
buttons .
1. TIMER
Press the button
2.
Using the buttons
the desired time.
3. MEMORY SETTING
Press the button
On the display "T" blinks.
4.
Press the button for the desired memory save
location. There are 6 memory slots at your
1-6
disposal: Buttons
number of the selected memory save location
appears.
5. MEMORY SETTING
Press the button
The time is now saved.
To once again show the time, press the button
MODE SETTING
i .
6.
To recall the saved kitchen timer settings, in auto-
matic mode press the button
button of the corresponding memory save
1-6
location (Buttons
7. TIMER
Press the button
kitchen timer. A clock symbol running in an
anti-clockwise direction appears on the display.
8.
To return to automatic mode, press and hold
TIMER
o
the button

Alarm feature (Alarm1 and Alarm2)

You can programme two alarm times into your
kitchen radio.
Alarm function
Acoustic signal
Radio
Switched off
o
.
UP/DOWN
s
programme in
u
.
r
. On the display the
u
once again.
TIMER
o
and the
r ).
o
once more to start the
for two seconds.
Symbol in the display
no symbol
1.
In the automatic mode press the button
ALARM 1
f (or
time and the symbol for the type of alarm are
shown on the display.
2.
Press the buttons
alarm time.
3.
Press the button
repeatedly until the desired alarm function
(see table above) is shown on the display.
4.
Press the button
days on which you require the alarm function:
You can choose between workdays (Mo, Tu,
We, Th, Fr), weekends (Sa, Su), the whole
week (Su, Mo, Tu, We, Th, Fr, Sa) and any indi-
vidual day.The selected setting is shown on
the display.
5.
Press the button
the desired alarm days are programmed in.
Keep the button
until a single day appears on the display.
6.
Press the button
required weekday.
To return to the selection of workdays, weekends
or whole weeks, once again hold the button
ALARM MODE
o briefly pressed down.
7.
Press the button
settings and to return to automatic mode.
When the alarm signal sounds...
• and the alarm function "Radio" has been selected,
the radio plays for one hour at a pre-defined
alarm volume. To switch it off, press the button
ALARM 1 ALARM 2
f
or
• and the alarm function "Signaltones" has been
selected, the signal tone sounds for 10 minutes.
To switch it off, press the button
ALARM 2
d
.
- 8 -
ALARM 2
d ). The last set alarm
UP/DOWN
s
to set the desired
ALARM 1 ALARM 2
f
(or
ALARM MODE
o
to set the week-
ALARM MODE
o repeatedly until
ALARM MODE
o
pressed down
ALARM MODE
o to set the
MODE SETTING
i
to save the
d
.
ALARM 1
d
)
f or