Switching The Alarm Function On; Switching The Alarm Off; Switching The Alarm Function Off; Snooze Function ("Snooze" Function) - Silvercrest SRD 250 A2 Operating Instructions Manual

♦ Press the AL1 button
GB
setting.
CY
NOTICE
► If you want to be awakened with the radio, apart from the wake
time programming you must also set, additionally, the desired
radio station and volume (see section Radio operation).

Switching the alarm function on

♦ Press briefl y the AL1 button
display
alarm function is now activated.
Switching the alarm off
♦ Whilst the alarm is sounding press the
AL1 button
24 hours.
Switching the alarm function off
♦ Press briefl y the AL1 button
indicators go out in the display

Snooze function ("SNOOZE" function)

♦ Whilst the alarm is sounding press the SNOOZE button
rarily switch off the alarm. After 6 minutes the alarm sounds again.
NOTICE
► When the snooze function is activated, a point appears in the
display
14
or AL2 button
16
a point appears to the lower left and/or right. The
2
and/or AL2 button
16
at the top right (
2
Handling and operation
again to accept the
15
and/or AL2 button
16
/BAND button
, to switch the alarm off for
15
and/or AL2 button
16
.
2
).
. In the
15
or the
9
. The alarm
15
to tempo-
SRD 250 A2