Preparing The Measurement - Beurer BM 54 Instructions For Use Manual

Information on the display:
1
12
11
10
9
8 7 6 5
1. Time/date
2. Systolic pressure
3. Diastolic pressure
4. Calculated pulse value
5. Cardiac arrhythmia symbol
6. Pulse symbol
7. User memory
8. Risk indicator
9. Number of memory space/memory display for average
value ( ), morning (
10. Release air (arrow)
11. Battery display symbol
12. Symbol for Bluetooth
2
3
4
), evening ( )
transfer
®
System requirements for the "beurer Health Manager" app
– iOS ≥ 8.0 / Android
TM
– Bluetooth ≥ 4.0
®
List of compatible devices:

4. Preparing the measurement

Inserting the batteries
• Remove the battery compartment lid
on the rear of the device.
• Insert four 1.5 V AAA (alkaline type
LR03) batteries. Make sure that the
batteries are inserted the correct
way round. Do not use rechargeable
batteries.
• Close the battery compartment lid
again carefully.
All display elements are briefly displayed,
in the display. Now set the date and time as described below.
If the battery replacement symbol
played, you can no longer perform any measurements and must
replace all batteries. Once the batteries have been removed from
the device, the date and time must be set again. Any saved
measured values are retained.
22
≥ 4.4
is permanently dis-
4 x 1,5V AAA
or flashes