Grizzly G0854 Owner's Manual page 30

12. Loosen panel feeder lock lever (see
Figure 28).
Figure 28. Location of panel feeder lock lever.
13. Rotate panel feeder elevation handwheel
clockwise to slightly raise panel feeder, then
remove wood shipping blocks from infeed
and outfeed ends of table (see Figure 29).
Outfeed End
Wood
Shipping
Block
Figure 29. Location of wood shipping blocks to
be removed.
-28-
Panel Feeder
Lock Lever
Infeed End
Wood
Shipping
Block
14. Remove shipping tag from rear access cover,
then open cover and remove shipping tag from
end-trimming guillotine (see Figures 30–31).
Shipping
Tag
Figure 30. Location of rear access cover
shipping tag to be removed.
Shipping
Tag
Figure 31. Location of end-trimming guillotine
shipping tag to be removed.
15. Pull out extension table (see Figure 32) as
far as it goes.
Figure 32. Extension table extended.
Model G0854 (Mfd. Since 08/18)
Rear Access
Cover