Grizzly G0854 Owner's Manual page 11

Front, Open
Front, Closed
AH
AG
panel feeder
Panel Feeder
AG. Panel Feeder: Uses conveyor belt to advance
workpiece from infeed end of table to outfeed
end of table during edgebanding operation.
Height is adjustable according to workpiece
thickness.
AH. Panel Feeder
Raises and lowers panel feeder according
to workpiece thickness. Rotate clockwise to
raise panel feeder; rotate counterclockwise to
lower it. Handwheel base features a readout
that displays height in millimeters.
Note: Panel feeder elevation handwheel also
raises and lowers upper portions of flush trim-
ming unit (see Page 8 for more information).
Model G0854 (Mfd. Since 08/18)
AH
AG
Figure 6. Panel feeder controls & components.
Elevation Handwheel:
AI. Panel Feeder Lock: Locks panel feeder in
position during edgebanding operations.
AI
-9-