Advan AMM215WTTP User Manual page 9

This monitor is intended for use in Health Care Facilities Model AMM215WTTP Equipment is
not suitable for use in the presence of flammable anesthetic mixture with air or with oxygen
or nitrous oxide.
No user serviceable parts inside, ask qualified personnel when accessing inside.
This product contains electrical waste or electronic equipment. It must not be disposed of as
unsorted municipal waste and must be collected separately.
Electrical input rating: 12V DC 3A
Classification
Type of protection against electric shock: Class I Equipment.
Degree of protection against the ingress of water: IPX1 compliance.
Mode of operation: Continuous
This monitor has been tested to comply with IEC/EN 60601-1, IEC/EN60601-1-2 and is
certified by UL to medical standard(UL/cUL Mark).
Because many medical offices are located in residential areas, this monitor, in addition to the
medical requirements, has also been tested and found to comply with
the limits for FCC Class B computing devices in a typically configured system. It is the
system integrator or configurer's responsibility to test and ensure that the entire
system complies with applicable EMC laws.
Environmental conditions for transport and storage:
- Temperature range within -4° to 140° F (-20° to 60°C)
- Relative humidity range within 10% to 90%
- Atmospheric pressure range within 500 to 1060 hPa.
- Operating within 0° to 40°C
Environmental conditions for operating:
- Operating temperature range within 32° to 104° F (0° to 40°C)
6