Advertisement

Quick Links

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against radio frequency interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy. If not installed and used in accordance
with the instructions, it may cause interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause interference to radio or television reception (this can be determined by turning
this equipment off and on), the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
·
Increase the separation between this equipment and the receiver.
·
Connect this equipment to an outlet on a circuit different from which the
·
receiver is
Consult the dealer or an experienced radio/TV technician for help.
·
To comply with the limits for an FCC Class B computing device, always use the shielded
signal cord and shielded power cord supplied with this unit.
The Federal Communications Commission warns the user that changes or modifications to
the unit not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Le présent appareil numérique n'emet pas de bruits radioélectriques dépassant les limites
applicable aux appareils numériques de la class B prescrites dan le Réglement sur le brouillage
radioélectriques édicté par le ministére des Communications du Canada.
Trademark
IBM, PC, PS/2, PS/V, Personal System/2, and XGA are registered trademarks of International Business Machines Corp.
Windows and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the United
States and other countries.
Apple Macintosh is a registered trademark of Apple Computer, Inc.
Quadra is a trademark of Apple Computer, Inc.
UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company
Limited.
ENERGY STAR is a U.S. registered mark.
© 1999 ADVAN INT'L COPR.
connected to.
AGM15TK
1

Advertisement

Table of Contents
loading

Summary of Contents for Advan AGM15TK

  • Page 1: Fcc Compliance Statement

    Apple Macintosh is a registered trademark of Apple Computer, Inc. Quadra is a trademark of Apple Computer, Inc. UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company Limited. ENERGY STAR is a U.S. registered mark. © 1999 ADVAN INT’L COPR.
  • Page 2 User’s Guide TCO95 NOTICE This product is delivered with a shielded cord set. In order to complete with TCO requirements for low electromagnetic emission, this cord set must be connected to a grounded outlet. If the cord set is replaced by another cord set it is not guarantee that the product still complies with TCO requirements.
  • Page 3 Quick Setup (IBM/IBM Compatible under Windows 95/98) Please Read Carefully When Setting Up Your New Monitor AGM15TK Monitor Screen Adjustment and Resolution Setting Procedure for IBM/IBM Compatible Computers with Windows based OS system. Before adjusting the monitor, all the necessary drivers should be installed to your System and resolution has to be set to manufacturer’s recommended preset of 1024 x 768 @ 60Hz,...
  • Page 4 Quick Setup (IBM/IBM Compatible under Windows NT 4.0) Please Read Carefully When Setting Up Your New Monitor AGM15TK Monitor Screen Adjustment and Resolution Setting Procedure for IBM/IBM Compatible Computers with Windows based OS system. Before adjusting the monitor, all the necessary drivers should be installed to your System and resolution has to be set to manufacture’s recommended preset of 1024 x 768 @ 60Hz,...
  • Page 5 AGM15TK Quick Setup (Macintosh) Please Read Carefully When Setting Up Your New Monitor 1. Set your Macintosh Adapter on pages 23 and 24. 2. Push the “APPLE” icon on the upper left corn and execute Control Panel-> Monitors&Sound. Select “Thousands” for the Color Depth, Select “1024X768, 60Hz, 70Hz, 72Hz, 75Hz or 85Hz”...
  • Page 6 INTRODUCTION Congratulations on your purchasing of the AGM15TK high performance 15-inch color TFT LCD monitor. Driven by our strong focus on customer satisfaction, ADVAN has developed a wide range of size and unique technology. ADVAN added features are Advanced Viewing Solution (AVS), Advanced Timing Setup (ATS), and Advanced Mounting Solution (AMS).
  • Page 7 Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. ADVAN AGM15TK LCD Monitor and VGA cable · AC Power cord ·...
  • Page 8: Screen Position Adjustment

    User’s Guide SCREEN POSITION ADJUSTMENT In order to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The moni- tor can be adjusted to 30 degrees up as indicated by arrow below.
  • Page 9: Cleaning Your Monitor

    AGM15TK Avoid placing the monitor, or any other heavy object, on the power cord to prevent fire · or electrical shock from damage to the power cord. Do not expose the monitor to rain, excessive moisture, or dust to avoid fire or shock ·...
  • Page 10: Preset Modes

    User’s Guide PRESET MODES To reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below. If any of these display modes are detected, the monitor automatically adjusts the picture size and centering. When none of the mode is matched, the user can store their preferred modes in the user modes.
  • Page 11: Power Management Function

    AGM15TK POWER MANAGEMENT FUNCTION The monitor is equipped with the power management function which automatically reduce the power consumption when not in use in three power level modes. Stand-by Mode · The monitor goes into stand-by mode when the horizontal sync signal is off for about 10 seconds.
  • Page 12: Installation

    User’s Guide To make your installation easier, the monitor is able to Plug and Play with your system if your system also supports DDC protocol. The DDC (Display Data Channel) is a communication protocol through which the monitor automatically informs the host system about its capabilities, for example, supported resolutions and corresponding timing.
  • Page 13 AGM15TK To make your installation easier, the monitor is able to Plug and Play with your system if your system also supports DDC protocol. The DDC (Display Data Channel) is a communication protocol through which the monitor automatically informs the host system about its capabilities, for example, supported resolutions and corresponding timing.
  • Page 14: Connecting With Video Equipment

    User’s Guide Display for Video and Image Playback Explains how to use our AGM15TK to play VCR, view television, video game, or digital camera images. It also show you how to connect video and other types of video equipment to the display.
  • Page 15: User Controls

    AGM15TK USER CONTROLS Front Panel Controls 1. Power LED: Lights up to indicate the power is turned ON. 2. Power Switch: To turn ON or OFF the power. 3. +: To increase the value of the parameter in the OSD you have selected for adjustment.
  • Page 16 User’s Guide OSD Scren Basic Section Under VGA display MENU ADVAN Auto Adjust Auto Adjust Brightness Contrast Black-Level MODE : 800 x 600 H + 53.9KHz V + 85.4Hz MENU ADVAN Clock Clock Clock-Phase V-position H-position MODE : 800 x 600 H + 53.9KHz...
  • Page 17 AGM15TK OSD Scren Basic Section Under C-Video, S-Video Display ADVAN Controls V-Brightness Svid V-Contrast V-Hue V-Saturation NTSC MENU ADVAN Dither Dither Gamma MODE : 800 x 600 H + 53.9KHz V + 85.4Hz...
  • Page 18 User’s Guide OSD Function Description (Under VGA Display) l l i i l i . ) t . t s . f f . f f . f f . f f . f f . f f...
  • Page 19 AGM15TK OSD Function Description (Under C-Video, S-Video Display)
  • Page 20: Troubleshooting

    User’s Guide TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. • • • • • • • l l i , t f • • For more update information on our monitor http://www.advancorp.com Tech Support: 1-888-786-1688...
  • Page 21: Specification

    AGM15TK SPECIFICATION > " " " " " " " " t l i * All contents are subject to change without notice.
  • Page 22 User’s Guide Macintosh Adapter settings The Macintosh Adapter allows you to take advantage of the built-in video capabilities of your Macintosh computer with the monitor. With it, you may select any available video mode via the DIP Switches. Using the following chart, find the computer/resolution combination you wish to configure. There are alternate settings available for most computer/resolution combinations, but we recommend you set the factory preset timing.
  • Page 23 Mac Adapter settings Chart...
  • Page 24 User’s Guide...

Table of Contents