Vesa Mount For Your Monitor - Advan AMM215WTTP User Manual

Flat Panel Mounting Physical Mounting Interface by
VESA
This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface
standard which defines a physical mounting interface for flat panel monitors, and
corresponding with the standards of flat panel monitor mounting devices, such as wall and
table arms. The VESA mounting interface is located on the back of your monitor.
To mount the monitor on a UL certified swing arm or other mounting fixture, follow the
instructions included with the mounting fixture to be used.
Warning
Please select the proper screws!
The distance between the back cover surface and the bottom of the screw hole is 8
mm. Please use four M4 screws diameter with proper length to mount your monitor.
Please note: the mounting stand must be able to support at least 17.6 lbs (8Kg).
100.0 mm
Slots(X6)
14
VESA
Mounting
Interface