Page 1
ADVAN AUTO - SCANNING WITH DIGITAL CONTROL LCD COLOR MEDICAL MONITOR AMM190WTD Operation Manual For future reference, record the serial number of your display monitor in the space below : Serial Number The serial number is located on the back of the monitor...
Page 3
ADVAN INT’L CORP.2009 All other trademarks are the property of their reference owners. This document is subject to change without notice. Advan provides this information as reference only. Reference to other vendor’s products does not imply any recommendation or endorsement. Revision Control...
Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. • AMM190WTD LCD Monitor and two video cables (1) HD15 VGA cable* (1) DVI-D cable* •...
Product(s), therefore, may not agree in detail to the published design or specifi cations. All specifi cations are subject to change without notice. Please contact ADVAN Int’l Corp directly or phone your local ADVAN Int’l Corp sales representative or agent for information on changes and new products.
Page 7
AMM190WTD 5 Warnings 1. Read the operating manual thoroughly and be familiar with its contents prior to using this equipment. 2. Carefully unpack the unit and check if any damage occurred during shipment. 3. Should any solid object or liquid fall into the panel, unplug the unit and have it checked by qualifi...
Page 8
Cautions 1. The AC Adapter must be plugged into a Grounded power outlet. 2. Use only the proprietary AMM190WTD power supply for the AMM190WTD monitor. Make a proper connection by ensuring that the shrink tubing completely secures the connection between the DC power cord and the extension cord.
AMM190WTD 7 Symbol Defi nitions Dangerous: High Voltage Direct Current Serial Number Top – Bottom Fragile Do not get wet Consult accompanying documents. Indicates proof of conformity to applicable European Economic Community Council directives and to harmonized standards published in the offi cial journal of the European Communities.
For a copy of the Declaration of Conformity document, please contact ADVAN Int’l Corp. and request for AMM190WTD DOC. Prepare for Unpack Before you unpack your monitor, prepare a suitable workspace. You...
AMM190WTD 9 SAFETY PRECAUTION · Avoid placing the monitor, or any other heavy object, on the power cord to prevent fi re or electrical shock from damage to the power cord. · Do not expose the monitor to rain, excessive moisture, or dust to avoid fi...
LED blinks for 1 seconds On and 1 second Off. The screen is displayed after the vertical and horizontal sync signals are restored. Power Management System The AMM190WTD Medical Monitor power management proposal. Provides four phases of power-saving modes by detecting the horizontal sync signal as shown in the table below.
AMM190WTD 13 PIP / POP / PBP function The following combination options are available to you: Component Main SDI1 SDI2 C-Video / RGBs SDI1 SDI2 C-Video Component / RGBs...
User’s Guide To make your installation easier, the monitor is able to Plug and Play with your system if your system also supports DDC protocol. The DDC (Display Data Channel) is a communication protocol through which the monitor automatically informs the host system about its capabilities, for example, supported resolutions and corresponding timing.
AMM190WTD 15 CONNECTING the POWER CORD * Check fi rst to make sure that the power cord you use is the correct type required for your area. * This monitor has an universal AC adapter that allows operation in either AC 100 - 240 V ac voltage area.
User’s Guide User Functions / Messages Key Name and Function Power LED : Lights up to indicate the power is turned ON. Power Switch : To power ON or OFF the monitor. Rotary switch : With the OSD menu activated, increases the value of the selected (Ture Right) parameter or moves rightward in OSD menu.
AMM190WTD 17 OSD Section Main Menu Chromatic Adjust Color Temp, Gamma Visual Adjust Brightness, Contrast, Phase, Chroma, Sharpness-H, Sharpness-V Setting Adjust Scale Mode, Color Space, Mirror, Freeze Frame, Zoom / Pan, PIP, POP, PBP Advanced Adjust OSD Position Control, Screen Control, DPMS, Auto...
Page 20
User’s Guide OSD Section Chromatic Color Temp Change the color temperature - D65, D93, S1, S2 Gamma Change the gamma value - 1.8, 1.9, 1.95, 2.1, 2.1S, 2.2, 2.3, 2.4, 2.4S, S0, Radio graph Exit Exit the menu Visual Brightness Adjust the brightness of panel (Range 0 - 100) Contrast Adjust the contrast of video (Range 0 - 100)
Page 21
AMM190WTD 19 OSD Section Setting Scale Mode Change the scale mode - Fill all, One to One, Vertical - fi ll, Horizontal - fi ll, Fill aspect ratio Color Space Change color space between RGB and YPbPr available for Component and RGBS...
Page 22
User’s Guide OSD Section Sub menu of PIP Mode PIP Mode ON / Off Source PIP sub screen source - SDI1,2, C-Video, S-Video, Component, VGA, DVI, SOG Position PIP sub screen position - Top L, Top R, Bottom L, Bottom R Size PIP sub screen size - Small, Medium, Large Blending...
Page 23
AMM190WTD 21 OSD Section Sub menu of POP Mode POP Mode ON / Off Source POP sub screen source - SDI1,2, C-Video, S-Video, Component, VGA, DVI, SOG Position POP sub screen position - Top L, Top R, Bottom L, Bottom R...
Page 24
User’s Guide OSD Section Advanced OSD Position Change the OSD menu - Position, Background, Control OSD time out, Language Screen Control Control and adjust H and V position, Freqency, Phase Noise Reduction, Motion Offset DPMS Change the DPMS Auto Source Adjust Auto Source Select between on and off Select Smart Select...
Page 25
AMM190WTD 23 OSD Section Sub menu of OSD Control H-position Adjust OSD H - position (Range 0 - 100) V-position Adjust OSD V - position (Range 0 - 100) Back ground Adjust transparency of OSD back ground (Range 0 - 100)
Page 26
User’s Guide OSD Section Information Custom Entry Change the user or monitor’s name Display the serial number Run Time Display the total run time Input Format Display the current input resolution and vertical frequency Exit Exit the menu...
AMM190WTD 25 TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. Problems Current Status Remedy No Picture LED ON · Using OSD, adjust brightness and contrast to maximum or reset to their default settings.
User’s Guide SPECIFICATION Model AMM190WTD LCD Panel 19 TFT LCD Panel Type Active Matrix Resolution 1680 x 1050 @ 60Hz Pixel Pitch 0.24mm Display Color 16.7M colors Color Tone Up to 256 color tone Response Time <25ms Typ. Face Finishing Protective Filter with Anti-Refl...
CAN/CSA C22.2 NO. 601.1 Medical Equipment E215822 This monitor is intended for use in Health Care Facilities model AMM190WTD Equipment is not suitable for use in the presence of fl ammable anesthetic mixture with air or with oxygen or nitrous oxide.
Consult the tables below for guidance in placing the AMM190WTD. Manufacturer’s declaration - electromagnetic emission The Model AMM190WTD is intended for use in the electromagnetic environment specifi ed below. The customer or the user of AMM190WTD should assure that it is used in such an environment. Emission test Compliance...
Page 31
To assess the electromagnetic environment due to fi xed RF transmitters, an electromagnetic site survey should be considered. If the measured fi eld strength in the location in which the AMM190WTD is used exceeds the applicable RF compliance level above, the AMM190WTD should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the AMM190WTD.
Page 32
Recommended Separation Distances Between Portable and Mobile RF Communications Equi- pement and the AMM190WTD System The AMM190WTD system is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The user of the AMM190WTD system can help prevent electromagnetic...
Advan, and to any drawings or specifi cations furnished to Advan by the Buyer if approved by Advan. This warranty shall be effective only if Advan receives notice of such defect or nonconformance during the period of the warranty.
Page 36
Service If your Medical Monitor needs service, call Advan Customer Service / RMA at (510)490-1005 between 7:00 a.m and 4:00 p.m PST, Monday through Friday or fax to (510)490-1151. You will need the unit’s serial number and a brief description of the problem and where unit were purchased to receive a RMA number.
Page 38
ADVAN INT’L CORP 47817 Fremont Blvd. Fremont, CA 94538, USA Tel : 510-490-1005 Fax : 510-490-1151 Web Page : http://www.advancorp.com ADVAN Korea 150-871 서울시 영등포구 여의도동 14-24 삼보호정빌딩 2층 210호 Tel : 02.783.5197 Fax : 02.783.5196...