User Manual v1.0
SNMP Settings
SNMP Settings
SNMP Settings
SNMP Settings
This section allows configure parameters for Simple Network Management Protocol running on the
modem. It is NOT recommended that these settings be changes as doing so will affect your ISP's
ability to access your box and help you solve your problems with the same.
1. Tick Enable SNMP box to enable SNMP.
2. Enter the System Name on required field
3. Enter the System Location on the required field
4. Enter the System Contact on the required field.
5. Enter Public or Private for Read only community
6. Enter Public or Private for Read Write community.
All manuals and user guides at all-guides.com
Page 45 of 46