Table of Contents
Advertisement
User Manual v1.0
Note:
Note: Go to Advanced>WAN>WAN settings to configure your VLAN. You must be on Administrator account to
Note:
Note:
change the settings.
Diagnostics
Diagnostics
Diagnostics
Diagnostics
This section allows user to test their ADSL OAM configuration.
LAN
LAN
LAN
LAN
This section allows user to configure their LAN settings and monitor their local network. User can also
set the DHCP configuration.
LAN Settings
LAN Settings
LAN Settings
LAN Settings
1. Enter the IP address that you would like to use on your local Network on the IP address box.
2. Enter the Subnet Mask that you would like to use on the Subnet Mask IP address box then
click Apply
3. Reboot the modem for the settings to take effect.
All manuals and user guides at all-guides.com
Page 36 of 46
Advertisement
Table of Contents
