Table of Contents
Advertisement
User Manual v1.0
3. Type - Select the protocol that you would like to port forward by selecting on the radio button.
4. Private IP - Enter the IP address of the device that you would like to port forward.
5. Remote IP - This is optional
6. Private Port - Enter the port number that you would like to have an access thru the modem
7. Public Port - Enter the port number that the modem will allow to have an access to the local
device.
8. Enable - Tick the box to enable Port Forwarding
9. WAN Interface: Select that WAN interface that you would like to port forward then click Apply.
DMZ
DMZ
DMZ
DMZ
This section allows user to open all ports so that the remote users accessing services such as the Web
or FTP at your local site via public IP address can be automatically redirected to the local server.
1. Click Advanced then select DMZ.
2. Tick the Enable Box to enable DMZ
3. Enter the local IP address of the device that you would like to access remotely.
4. Click the Apply button to save the settings.
All manuals and user guides at all-guides.com
Page 21 of 46
Advertisement
Table of Contents
