ControlByWeb WebRelay X-WR-1R12-1I5-5 User Manual page 31

WebRelay Users Manual
8. If "Use the following IP address" is already selected, the computer has been setup with a static IP
address. Record these values so that the current IP address of the computer can be restored once the IP
address of the WebRelay has been successfully changed.
Select the radio button labeled "Use the following IP address" and type in the IP address:
192.168.1.50
Type in the subnet mask:
255.255.255.0
No need to change the default gateway field. Click OK to accept the new settings.
9. Open the setup pages of the WebRelay by entering the following URL in the address bar of a web
browser:
http://{ipaddress}/setup.html
(For example: http://192.168.1.2/setup.html)
If the setup pages are not accessible, verify that the WebRelay is powered on and that the LINK light is
illuminated. Check all network connections and settings.
Another way to check communications is to ping the WebRelay from the command prompt by typing:
ping [ipaddress] (e.g. ping 192.168.1.2)
Xytronix Research & Design, Inc. Page 31