Table of Contents
Advertisement
BEFORE DRIVING
Gearshift indicator
The display (E) shows the gearshift indica-
tor.
EXAMPLE
54P000232
Refer to "Gearshift indicator" in "OPERAT-
ING YOUR VEHICLE" section.
Trip meter
The display (F) shows the trip meter.
The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
You can use trip meter A or trip meter B
independently.
To reset the trip meter to zero, push and
hold the trip meter selector knob (3) for
about 2 seconds when the display shows
the trip meter.
2-71
Odometer
The display (G) shows the odometer.
The odometer records the total distance
the vehicle has been driven.
NOTICE
Keep track of your odometer reading
and check the maintenance sched-
ule regularly for required services.
Increased wear or damage to certain
parts can result from failure to per-
form required services at the proper
mileage intervals.
Setting mode
When the ignition switch is in "ON" position
or the ignition mode is "ON" and the vehi-
cle is stationary, you can enter the setting
mode of the information display by pushing
and holding the indicator selector knob (2)
for more than 3 seconds.
• To select the setting that you want to
change, turn the indicator selector knob
(2) left or right.
• To change the setting, push the indicator
selector knob (2).
• To exit the setting mode, select "Back"
and push the indicator selector knob (2).
EXAMPLE
61MM0A161
NOTE:
The currently selected setting item is sur-
rounded by a frame.
54P00-01E
Advertisement
Table of Contents
