Unlatching And Latching Detachable Connector - Suzuki VITARA series Owner's Manual

BEFORE DRIVING
Unlatching and latching detachable
connector
EXAMPLE
(1)
61MM0A063
Unlatching
To unlatch the connector:
1) Insert a key or a latch plate into the slot
(1) on the connector and allow the belt
to retract.
2) Once the belt has completely retracted,
stow the belt in the holder. Refer to
"Stowing rear center lap-shoulder belt"
for details in this section.
NOTICE
When the rear seatback is folded for-
ward, unlatch the connector of rear
center lap-shoulder belt. Otherwise,
the seat belt webbing can be dam-
aged.
2-33
Latching
To latch the connector:
1) Pull the belt out from the holder.
(2)
(3)
61MM0A064
2) Insert the connector latch plate (2) into
the connector (3) to align the triangle
marks until you hear a click.
WARNING
Check that the detachable connector
is securely latched and the webbing
is not twisted.
Stowing rear center lap-shoulder belt
Stow the belt after it is retracted com-
pletely.
(3)
(2)
61MM0A065
To stow the belt, insert the latch plate into
the slit (1). Then insert the connector latch
plate (2) into the roof holder slot (3).
NOTE:
For Australia:
For additional information, refer to "SUP-
PLEMENT" section in the end of this book.
54P00-01E
(1)