Lap-Shoulder Belt With Detachable Connector - Suzuki VITARA series Owner's Manual

BEFORE DRIVING
To fasten the seat belt, sit up straight and
far back into the seat, pull the latch plate
attached to the seat belt across your body
and press it straight into the buckle until
you hear a click.
EXAMPLE
2-31
NOTE:
The word "CENTER" is marked on the
buckle for the rear center belt. The buckles
are designed so a latch plate cannot be
inserted into the wrong buckle.
60A036
To unfasten the seat belt, push the red
"PRESS" button on the buckle and retract
the belt slowly while holding the belt or/and
the latch plate.
80J2008
Lap-shoulder belt with detachable
connector
EXAMPLE
The rear center lap-shoulder belt has a
60A039
buckle, a latch plate and a detachable con-
nector. The buckle is marked as "CEN-
TER" for distinction from the rear left seat
belt buckle. The rear center seat belt
buckle and the connector are designed so
as not to allow a wrong latch plate to be
inserted.
When the rear seatback is in the upright
position, keep the detachable connector
latched. Only when the rear seatback is
folded down, unlatch the detachable con-
nector. To latch and unlatch the connector,
refer to "Unlatching and latching detach-
able connector" in this section.
54P000221
54P00-01E