Seat Belt Pretensioner System - Suzuki VITARA series Owner's Manual

1) Remove the luggage compartment cover.
2) Secure the child restraint on the rear
seat using the procedure described
above for securing a restraint system
that does not require a top tether strap.
3) Hook the top tether strap to the top
tether anchorage bracket and tighten
the top tether strap according to the
instructions provided by the child
restraint system manufacturer. Attach
the top tether strap to the correspond-
ing top tether anchorage bracket
located directly behind the
restraint. Do not attach the top tether
strap to the luggage restraint loops.
WARNING
Do not attach the child restraint top
tether strap to the luggage restraint
loops. Incorrectly attached top tether
strap will reduce the intended effec-
tiveness of the child restraint system.
EXAMPLE
child
4) When routing the top tether strap, pass
the top tether strap as shown in the
illustration. (Refer to "Head restraints"
section for details on how to remove the
head restraint.)
5) Check that cargo does not interfere
with routing of the top tether strap.
NOTICE
When installing a child restraint sys-
tem to the rear seat, adjust the front
seat position so that the front seat
does not interfere with the child
restraint system.
BEFORE DRIVING

Seat belt pretensioner system

and/or
Label
54P000264
WARNING
This section describes your SUZUKI
vehicle's seat belt pretensioner sys-
tem. Read and follow all these
instructions carefully to minimize
your risk of severe injury or death.
EXAMPLE
63J269
2-48
54P00-01E